v1.3 Release Candidate to support MT4 Build 545, 574+

[raduParticipant February 3, 2014 at 9:43 am Post count: 26]

#19647

Thank you for the new release!

Hungarian version of the news available here!

Ps.: I sent you an e-mail about a minor translation problem:)

[imported_tickstoryParticipant February 4, 2014 at 3:23 am Post count: 1479]

#19648

Hi Radu – thanks for your feedback! The Hungarian translation has been corrected and will be available in the official v1.3 release.

Kind regards.

[raduParticipant February 4, 2014 at 9:49 am Post count: 26]

#19649

@tickstory wrote:

Hi Radu – thanks for your feedback! The Hungarian translation has been corrected and will be available in the official v1.3 release.

Thanks! 😉

[DobermannParticipant February 4, 2014 at 5:31 pm Post count: 5]

#19650

Unfortunately not works with MT4 build 600 😥

[DobermannParticipant February 4, 2014 at 5:33 pm Post count: 5]

#19651

Also when selecting folder for such new install its unable to detect installation at all…. Seems the issue caused new folder layout (MT4 store history and other user data in AppData now).

[imported_tickstoryParticipant February 5, 2014 at 12:24 am Post count: 1479]

#19652

Hi Dobermann,

You will need to use the /portable flag to ensure all data is stored in the MT4 directory. You will also need to make sure your MT4 installation is not under “Program Files” folder since Windows will prevent data from being written here.

Please let us know how you go.

Regards.

[aravindhfxParticipant February 5, 2014 at 4:38 am Post count: 1]

#19653

HI,
First i would like to thank u for the service u provide.

And for the latest version of MT4 i am not able to install it the modeling quality is na.

Can u please explain the steps to install and let know if we have to download the data again from dukascopy

Aravindh

[DobermannParticipant February 5, 2014 at 1:19 pm Post count: 5]

#19654

@tickstory wrote:

Hi Dobermann,

You will need to use the /portable flag to ensure all data is stored in the MT4 directory. You will also need to make sure your MT4 installation is not under “Program Files” folder since Windows will prevent data from being written here.

Please let us know how you go.

Regards.

Tried this, it solved the problem with MT4 detection of course, but when I launch it from Tickstory it started in non-portable mode (checked by using “Open data folder” from File menu). So if tickstory exports data to MT4 folder – it will not work, because active folder is the one from AppData. Right ? Solution can be to add an option somewhere to specify additional command line arguments for launching MT4.

[TickTesterParticipant February 5, 2014 at 11:23 pm Post count: 7]

#19655

So, how do we launch MT4 build 600 from Tickstory in portable mode? I don’t see a way to add the “/portable” in Tickstory. Bloody Metaquotes updated my MT4 testing platform to build 600 without my consent. Now, the tester/history folder is under roaming folder on my C: drive, but my C: drive being a solidstate drive does not have room for the humongous tick history files which is why I have them on a 4TB hard drive. But, the new build 600 doesn’t see them there, of course. Can someone suggest a way to sort this out?

[4EverMaATParticipant February 6, 2014 at 3:21 am Post count: 24]

#19656

@dobermann wrote:

Unfortunately not works with MT4 build 600 😥

@tickstory wrote:

Hi Dobermann,

You will need to use the /portable flag to ensure all data is stored in the MT4 directory. You will also need to make sure your MT4 installation is not under “Program Files” folder since Windows will prevent data from being written here.

Please let us know how you go.

Regards.

Doberman is correct. It doesn”t detect with mt4 build 600. You need to update the beta to assume that the user installs a fresh copy of mt4 on their computer (no upgrade)

I am 100% sure of this. I installed a fresh copy of Excel Markets outside of the Program files folder. TickLite 1.3 could not detect the installation folder.

What I did as a workaround is manually navigated to the “[C:[Windows User]AppDataRoamingMetaQuotesTerminalFE4723A6C29xxxxxxxxxxxxxxxx This takes some extra time. And to check to make sure you have the correct folder, MQ at least created a “origins.txt” you can use to see which broker and installationfolder the “FE4723A6C29xxxxxxxxxxxxxxxx ” belongs to.

It appeared to detect the folder ok after that. But then the test came to launch the mt4. I got this error: Mt4 launch issue. See screenshot.
[attachment=0:7sco6mpd]tickstory mt4 build 600 launch error.png[/attachment:7sco6mpd]

Has anyone else been able to get it to work? I have TDS, but Tickstory should be able to operate independently of TDS.

[raduParticipant February 6, 2014 at 7:41 am Post count: 26]

#19657

@4evermaat wrote:

I am 100% sure of this. I installed a fresh copy of Excel Markets outside of the Program files folder. TickLite 1.3 could not detect the installation folder.

What I did as a workaround is manually navigated to the “[C:[Windows User]AppDataRoamingMetaQuotesTerminalFE4723A6C29xxxxxxxxxxxxxxxx This takes some extra time. And to check to make sure you have the correct folder, MQ at least created a “origins.txt” you can use to see which broker and installationfolder the “FE4723A6C29xxxxxxxxxxxxxxxx ” belongs to.

It appeared to detect the folder ok after that. But then the test came to launch the mt4. I got this error: Mt4 launch issue. See screenshot.

+1 for this, 4EverMaAt is right.

The problem appears when the MT4 installed outside Program Files folder, and UAC is turned on. If UAC is turned off, the location of the installation path is not relevant.

@tickstory wrote:

You will need to use the /portable flag to ensure all data is stored in the MT4 directory. You will also need to make sure your MT4 installation is not under “Program Files” folder since Windows will prevent data from being written here.

This is no longer is the case in my opinion. The whole AppDataRoaming stuff seems to be working, and we do not need the ability to write into the installation directory (no matter if it’s in Program Files, or elsewhere)

[DobermannParticipant February 6, 2014 at 8:20 am Post count: 5]

#19658

I think ideal solution to support both MT4 <574 and 574+ is to make additional field in Settings to specify MT4 data folder path, the current field should be used only to find executables for launch. Now fields in settings will be

1) MT4 Installation
2) MT4 Data folder (the same as 1 by default).
3) Server name.

[imported_tickstoryParticipant February 6, 2014 at 10:43 pm Post count: 1479]

#19659

@aravindhfx wrote:

HI,
First i would like to thank u for the service u provide.

And for the latest version of MT4 i am not able to install it the modeling quality is na.

Can u please explain the steps to install and let know if we have to download the data again from dukascopy

Aravindh

Hi Aravindh,

Correct – for the moment, modelling quality is not displayed correctly. This is a quirk with using the new MT4 build and we may address it in the future. It should not affect your back-test results.

Re: Dukascopy data, you should not need to re-load this information – simply ensure your Dukascopy ‘Store location’ is the same folder as before and Tickstory will use the existing data.

Regards.

[TickTesterParticipant February 6, 2014 at 11:31 pm Post count: 7]

#19660

@ticktester wrote:

So, how do we launch MT4 build 600 from Tickstory in portable mode? I don’t see a way to add the “/portable” in Tickstory. Bloody Metaquotes updated my MT4 testing platform to build 600 without my consent. Now, the tester/history folder is under roaming folder on my C: drive, but my C: drive being a solidstate drive does not have room for the humongous tick history files which is why I have them on a 4TB hard drive. But, the new build 600 doesn’t see them there, of course. Can someone suggest a way to sort this out?

Anyone have an answer for the above question?

I have Tickstory v1.3 and MT4 build 603. We are supposed to launch MT4 from within Tickstory, which is fine, but it doesn’t see my history data that way and there is not enough room on my C: drive to move it all there. So, I’m assuming /portable mode may get around this issue and allow me to keep all the history data in the previous location? The previous location was not under “program files”. The problem is, I don’t see any way to launch MT4 from within Tickstory in /portable mode.

[imported_tickstoryParticipant February 6, 2014 at 11:47 pm Post count: 1479]

#19661

Hi Dobermann, Ticktester & Radu –

We are currently looking at the issues you mentioned, including assessing Build 600. For the moment, it should be possible to launch MT4 in portable mode outside of Tickstory (i.e. create a short-cut to the application and add /portable to the command-line parameters). As long as your FXT files are read-only, you should be able to continue back-testing until a further update is available.

Regards.

[Author]

Posts