Page 1 of 1

No Results when back-testing

Posted: Thu Jan 14, 2016 3:45 pm
by Andrey39
Good afternoon!
I bought a license
I insert it directly into the program Tickstory_1.7.3.0 The site did not put any where.
All done under the instruction it worked out! The test result 99.90
But why is the error in the log. Screen №1 attached. This is something with a counselor?
And the results of the test is such a picture screen 2. The quality of the simulation 99.99, but in fact there were no transactions? All figures for nil, but the quality of 99.90.
Please tell me what's wrong?

Original:
Добрый день!
Вставил её непосредственно в программу Tickstory_1.7.3.0 На сайте ни где не вставлял.
Все сделал по инструкции все получилось! Результат теста 99,90
Но почему то в журнале ошибка. Скрин №1 прилагаю. Это что то с советником?
И по результатам теста вот такая картина скрин 2. Качество моделирования 99,99 Но по сути сделок не было? все показатели по нолям, но при этом качество 99,90.
Подскажите пожалуйсто в чем дело?

Re: No Results when back-testing

Posted: Fri Jan 15, 2016 11:41 am
by tickstory
Hi Andrey39,

The best thing to do if you're getting to results is firstly test with the MACD Sample EA. This will help confirm that you are getting trades and that your export has worked correctly (make sure you export at least 3 months of data).

Afer that, check out our FAQ on EA trouble-shooting which will give you some ideas of why your EA might not be trading:

http://tickstory.com/forum/viewtopic.php?f=2&t=876

Hope this helps.