I'm having trouble generating "Mt4.<vendor name>.Server.mt4config".

General discussion about the Tickstory Lite software package.
Post Reply
airu8
Posts: 3
Joined: Sat Jan 21, 2023 5:46 am

I'm having trouble generating "Mt4.<vendor name>.Server.mt4config".

Post by airu8 »

I am using Google Translate.
I would like to backtest with an XM Trading micro account.
I'm having trouble generating "Mt4.<vendor name>.Server.mt4config".

1) Settings > Complete MT4 settings
Imagehttps://photos.app.goo.gl/w9Sav7QMnuWqeWnq8
2) Tickstory > Right click symbol > Export to MT4
3) Click Help tab > Expand MQ4
4) Drag and drop TickstoryInfoExpert.ex4 in MT4 > Navigator to the chart
5) Change parameters
https://photos.app.goo.gl/jfMypXGWYVRapxJJ9
6) Confirmed that there are no errors in MT4 > Terminal > Expert tab
7) Tickstory > MT4 Export > Metatrader Information > Clicking the Read button opens the MT4 data folder > tester > history, but there is no "Mt4.<Trade name>.Server.mt4config".
8) There is no "Mt4.<vendor name>.Server.mt4config" in MT4 data folder > MQL4 > Files.
https://photos.app.goo.gl/pmi1nmeaRkimyXZm6
9) I checked if the data folder of MT4 is not the data folder of another MT4, but there is no "Mt4.<vendor name>.Server.mt4config".
https://photos.app.goo.gl/BZjZHVCU4babRj6H6

Please tell me how to generate "Mt4.<vendor name>.Server.mt4config".

(原文/日本語)
Google 翻訳を使用しています。
XMTrading micro口座でバックテスト希望。
「Mt4.<業者名>.Server.mt4config」が生成されなくて困っています。

1)設定>MT4の設定完了
https://photos.app.goo.gl/w9Sav7QMnuWqeWnq8
2)Tickstory>symbol右クリック>MT4へエクスポート
3)ヘルプタブ>MQ4を展開をクリック
4)MT4>ナビゲーターにあるTickstoryInfoExpert.ex4をチャートへドラックドロップ
5)パラメーターを変更
https://photos.app.goo.gl/jfMypXGWYVRapxJJ9
6)MT4>ターミナル>エキスパートタブでエラーが出ていないか確認済
7)Tickstory>MT4のエクスポート>メタトレーダー情報>読み込みボタンをクリックすると、MT4データーフォルダ>tester>historyが開くが「Mt4.<業者名>.Server.mt4config」は無し。
8)MT4データーフォルダ>MQL4>Filesにも「Mt4.<業者名>.Server.mt4config」無し。
https://photos.app.goo.gl/pmi1nmeaRkimyXZm6
9)MT4のデーターフォルダが他のMT4のデーターフォルダになっていないか確認したが、「Mt4.<業者名>.Server.mt4config」無し。
https://photos.app.goo.gl/BZjZHVCU4babRj6H6

どうしたら「Mt4.<業者名>.Server.mt4config」が生成されるのかどうか教えて下さい。

tickstory
Posts: 4883
Joined: Sun Jan 06, 2013 12:27 am

Re: I'm having trouble generating "Mt4.<vendor name>.Server.mt4config".

Post by tickstory »

Hi Airu8,

Thanks for posting the details of your issue. The EA will need at least 1 incoming tick before it is run, so make sure this is the case.
Otherwise, you can instead run the EA in the Strategy Tester (use "Open price" modelling mode).

Do also note that if you are wanting to get your symbol information, the "TickstoryExpert" EA is no longer needed. Instead, you can simply select your symbol in the MT4 Settings->Map To field. This will automatically detect the correct symbol settings from your broker. The TickstoryExpert EA is therefore only required if you need to know your account information such as "Leverage". If you already know this, you can just input the details manually.

Hope this helps.

airu8
Posts: 3
Joined: Sat Jan 21, 2023 5:46 am

Re: I'm having trouble generating "Mt4.<vendor name>.Server.mt4config".

Post by airu8 »

2023-01-23_14h09_20.jpg
I am using Google Translate.

Thank you for your reply.
You no longer need the indicator.

Once I opened the line to put symbol information into MT4. The line was closed after the micro hst file was generated in the corresponding MT4 history.
After that, I installed USDJPY, GOLD from tickstory to MT4, but hst files for those micros were not generated and cannot be used.
MT4 settings for tickstory have been completed.

What else do you need to do?

原文/日本語
Google翻訳を使用しています。

ご返答ありがとうございます。
インジケーターは不要となったのですね。

一旦symbolの情報をMT4へ入れる為に、回線を開けました。
該当MT4のヒストリーにmicroのhstファイルが生成されてから回線を閉じました。
その後tickstoryからUSDJPY,GOLDをMT4へインストールしましたが、それらのmicro用のhstファイルは生成されず、使用不可です。
tickstoryのMT4の設定は済んでいます。

あと、何の作業が足りませんか
Last edited by airu8 on Mon Jan 23, 2023 6:04 am, edited 1 time in total.

tickstory
Posts: 4883
Joined: Sun Jan 06, 2013 12:27 am

Re: I'm having trouble generating "Mt4.<vendor name>.Server.mt4config".

Post by tickstory »

Hello,


Please make sure you have selected the correct symbol name from the "Map to" selection to ensure your MT4 exported data is named correctly and according to your broker's symbol name.

Consulting this section in our manual (in Japanese) will hopefully help you further.

Thanks.

airu8
Posts: 3
Joined: Sat Jan 21, 2023 5:46 am

Re: I'm having trouble generating "Mt4.<vendor name>.Server.mt4config".

Post by airu8 »

I am using Google translation.
thank you for your reply. I didn't go well, so I left it for a while.
For more than a month, it was free, but it was produced without any problems yesterday. However, this time, if you try to launch MT4 from the last process, Tickstory, you will not get up. The operation was performed with reference to the following address.
https://tickstory.com/help/tickstorylit ... nching_mt4
The MT4 build is 1370. TickStory also has the latest version in 1.976.
It is stated that this future operation guarantee is not possible, but if MT4 can not be launched, it will be "N/A" and the exported data base cannot be used, so it can not be used as it is. How do you do it?

【原文】お返事ありがとうございます。なかなか上手く行かなかったので、暫く放置していました。
1ケ月以上間が空きましたが、昨日再び行った所、今度は問題なく生成されました。ただ、今度は最後の工程、TickstoryからMT4を立ち上げようとしても立ち上がりません。下記のアドレスを参考に動作を行いました。
https://tickstory.com/help/tickstorylit ... nching_mt4
MT4のビルドは1370です。Tickstoryも1.976で最新バージョンと記載があります。
こちらの将来の動作保証はできないと記載がありますが、MT4立ち上げができないと“n/a” となりエクスポートしたデーターベースが使用できないようで、このままでは使えません。なんとかなりませんでしようか?

tickstory
Posts: 4883
Joined: Sun Jan 06, 2013 12:27 am

Re: I'm having trouble generating "Mt4.<vendor name>.Server.mt4config".

Post by tickstory »

Hello,

Are you getting an error when launching? If yes, could you please check out our FAQ to resolve the problem:

https://tickstory.com/help/tickstorylit ... cher_error

Please note that if you have any additional software installed that uses MT4, please uninstall it. Otherwise you will get errors.

Thanks.

Japanese:
こんにちは、

起動時にエラーが発生していますか? はいの場合は、問題を解決するためによくある質問をご覧ください。

https://tickstory-com.translate.goog/he ... cher_error

MT4を使用する追加のソフトウェアをインストールしている場合は、アンインストールしてください。 そうしないと、エラーが発生します。

ありがとう。

airu8
Posts: 3
Joined: Sat Jan 21, 2023 5:46 am

Re: I'm having trouble generating "Mt4.<vendor name>.Server.mt4config".

Post by airu8 »

Thank you for your answer.

No error.
Just to be sure, I checked the contents of the FAQ at the time of the error, but there was no applicable matter.
It may be a problem with the performance of the PC, so after starting MT4, I left it for a while, but MT4 did not start.
Also, no software has been added to MT4.

原文/
ご回答をありがとうございます。

エラーはでていません。
念のためエラー時のFAQの内容を確認しましたが、当てはまる事項はありませんでした。
PCの性能の問題かもと、MT4の立ち上げの操作を行った後、暫くそのままにしておきましたが、MT4は起動しませんでした。また、MT4にソフトウエアは追加していません。

tickstory
Posts: 4883
Joined: Sun Jan 06, 2013 12:27 am

Re: I'm having trouble generating "Mt4.<vendor name>.Server.mt4config".

Post by tickstory »

Hello,

I'm not sure if something might be getting lost in translation here. I think the best approach might be to send screenshots of the following:

1) The Tickstory "Export to MT4" settings you are using (including the "MT4 Settings" tab)
2) The MT4 Strategy Tester window (which shows the symbol name)
3) Your "MT4 Data Folder" FXT contents (go to File->Open data folder in Metatrader and then browse to tester/history and take a screenshot).
4) The 'Report' tab in the Strategy Tester (which shows the modelling quality).
5) The Strategy Tester "Journal" tab after you have completed a back-test.

Thanks.

Japanese:

こんにちは、

ここで翻訳で何かが失われている可能性があるかどうかはわかりません。 最善の方法は、次のスクリーンショットを送信することだと思います。

1) 使用しているTickstoryの「MT4へのエクスポート」設定 (「MT4設定」タブを含む)
2) MT4 Strategy Tester ウィンドウ (シンボル名を表示)
3) 「MT4 データ フォルダー」FXT コンテンツ (メタトレーダーで [ファイル] -> [データ フォルダーを開く] に移動し、[テスター/履歴] を参照してスクリーンショットを撮ります)。
4) ストラテジー テスターの [レポート] タブ (モデリングの品質を表示します)。
5) バックテストを完了した後のストラテジー テスターの [ジャーナル] タブ。

ありがとう。

Post Reply