commission
commission
Hi, how to set-up commission of $7 per round trip? how to shown in backtest report?
Re: commission
Hi Kelvid,
You might want to check out a great thread on this written by one of our users on this topic:
https://tickstory.com/forum/viewtopic.php?f=2&t=1412
For $7 round-trip commission, use:
Comm type: 0 (money)
Base comm: 3.5 (one side)
Comm lots: 1 (per deal)
Of course, we recommend that if you want to get the exact settings from your broker, you can use this method to ensure all your settings (commission, symbol settings, etc) matches:
https://tickstory.com/forum/viewtopic.php?f=2&t=809
Hope this helps.
You might want to check out a great thread on this written by one of our users on this topic:
https://tickstory.com/forum/viewtopic.php?f=2&t=1412
For $7 round-trip commission, use:
Comm type: 0 (money)
Base comm: 3.5 (one side)
Comm lots: 1 (per deal)
Of course, we recommend that if you want to get the exact settings from your broker, you can use this method to ensure all your settings (commission, symbol settings, etc) matches:
https://tickstory.com/forum/viewtopic.php?f=2&t=809
Hope this helps.
Re: commission
Hi,
Based on the link share, shouldn't be the Base comm: 7 per round trip?
Based on the link share, shouldn't be the Base comm: 7 per round trip?
Re: commission
And the $7 round trip is for standard lot. So the setting for Commission per lot should be 0 instead of 1, right?
Re: commission
Hi Kelvid - that's correct. If it's "per lot" then comm type = 0.
Re: commission
How to set 2 per side per 100,000 traded of Tickmill?
Re: commission
Hi Xypaa,
Using the above-mentioned method of finding your broker settings, it seems Tickmill uses the following settings:
Base comm: 0.004
Comm type: 2
Comm lots: 0
If you are unsure if your terminal has the same settings, please use the method described above.
Thanks.
Using the above-mentioned method of finding your broker settings, it seems Tickmill uses the following settings:
Base comm: 0.004
Comm type: 2
Comm lots: 0
If you are unsure if your terminal has the same settings, please use the method described above.
Thanks.